Printer

From Astroneer Wiki
(Redirected from 3d Printer)
Jump to: navigation, search
DisambiguationWarning.png This article is about the larger base module printer. For the smaller, backpack-based printer, see Backpack.
The Printer Module, displaying the print schematic of a 1-Seat.

The Printer is a base module capable of printing larger, more expensive objects than the backpack printer. It costs 2 Copper to construct and consumes 4 bars of power (the entirety of its internal battery) to print one object. Like all modules, it is constructed on top of a level 2 platform.

Cycling through the printer module's available schematics will fill the input slots with the appropriate resources if they are attached to its base, either directly or via storage racks.

Printable Objects[edit | edit source]

Unlocked by Default[edit | edit source]

Object Resource Cost Description
1-Seat 2x Compound Attaches to a vehicle, allowing an Astroneer to control it.
Battery 2x Lithium Stores a large amount of power for later use.
Generator 2x Copper Generates a large amount of power in exchange for fuel.
Solar Panel 2x Compound Quickly generates power when exposed to natural light.
Storage 2x Compound Provides a large, movable rack for item storage.
Wind Turbine 2x Aluminum Quickly generates power when exposed to wind.

Unlocked via Research[edit | edit source]

Object Resource Cost Description
Drill Head 2x Copper Attaches to a crane or vehicle, allowing it to destroy terrain and collect resources.
Habitat 2x Compound Provides oxygen and a primary connection point for new base modules.
Winch 2x Titanium Attaches to a vehicle, allowing it to tow large objects.

See Also[edit | edit source]